Drill Machine- MB140 For PCB Drilling & Mini Craft Original price was: ₹425.00.Current price is: ₹169.00.
Jumper Wire DuPont Female To Female (10 Pins) Original price was: ₹25.00.Current price is: ₹22.00.
Plastic Blue Thin Spur Gear-50Teeth for 6mm Shaft Original price was: ₹65.00.Current price is: ₹55.00.
BD140 PNP Bipolar Transistor Original price was: ₹25.00.Current price is: ₹22.00.
BO Motor Wheel- 75mm Dia. x 8mm Width (1Pcs) Original price was: ₹22.00.Current price is: ₹16.00.

itz Ashish

11:43 04 Apr 25

Here no one buys any type of equipment, it is very costly and makes you lose money.

Ravish Raizada

09:28 13 Feb 25

Ritu Yadav

13:55 27 Dec 24

Very expensive

Rashish Baranwal

08:05 26 Aug 24

Every project item available here

Abhinav Srivastava

13:57 16 Aug 24

Detailed and knowledgeable

Abhinav Mishra

14:23 10 Aug 24

Well made

Akash s Rawat

14:23 10 Aug 24

Well maintained

Chandan Patel

11:56 05 Aug 24

Best institute for robotics training and projects.

Kamran Ali

07:33 05 Aug 24

A very good experience is there. Concerned person ramchandra ji is very coperative and has good knowledge of project development.

AMBER

03:20 28 May 24

💯👌👌👌
Robotics Products: 💯
Quality: 💯
Price: 💯
Service: 💯👌

-18%

MQ8-Hydrogen Gas Sensor Module

Original price was: ₹165.00.Current price is: ₹135.00.

Quick Review:

Operating Voltage: 5V DC (typically).
Sensor Resistance: The resistance of the sensor element changes with gas concentration, usually between a few kΩ and several hundred kΩ.
Sensitivity Range: Can detect hydrogen gas concentrations from 100 to 10,000 ppm.
Response Time: The sensor typically responds within a few seconds to changes in gas concentration, but it requires 1-2 minutes of preheating for optimal performance.

Shipping: Usually delivered in 3-7 days.

Brand New || Best Quality || Skype and Video Support Available.

Need in Bulk Quantity? Let’s Talk!

Availability:

Out of stock

The MQ8 Hydrogen Gas Sensor Module is a highly sensitive sensor designed specifically to detect the presence of hydrogen gas (H₂) in the air. It is widely used in various applications, including safety systems, gas leak detection, and industrial monitoring, due to hydrogen’s flammability and its use in various industrial processes, including fuel cells and hydrogen storage.

Key Features:

Gas Detection: The MQ8 sensor is designed to detect hydrogen gas (H₂), a colorless, odorless, and highly flammable gas. It can also detect low concentrations of other gases such as methane, carbon monoxide (CO), and alcohol, but its primary application is for hydrogen detection.
High Sensitivity: The MQ8 sensor offers high sensitivity to hydrogen, making it ideal for detecting even low concentrations of this gas. This is particularly important in environments where hydrogen gas is used or stored, to prevent potential leaks that could lead to dangerous situations.
Analog Output: The MQ8 provides an analog output that corresponds to the concentration of hydrogen gas detected in the environment. The output voltage increases in proportion to the concentration of gas present.
Digital Output: In addition to the analog output, some versions of the MQ8 also feature a digital output, which is a simple on/off signal that can be used to trigger alarms or control systems once the gas concentration exceeds a certain threshold.
Low Power Consumption: Designed to be energy-efficient, this sensor can operate in battery-powered applications or systems that require continuous monitoring over extended periods.
Preheating Time: Like other MQ sensors, the MQ8 requires a preheating time of about 1-2 minutes to stabilize and ensure reliable and accurate readings.
Wide Detection Range: It can detect hydrogen gas concentrations from approximately 100 to 10,000 ppm (parts per million), which makes it suitable for both low-level detection and high-concentration gas leaks.

How It Works:

The MQ8 sensor works by using a metal oxide semiconductor (MOS) that reacts with hydrogen gas when it comes into contact with the sensor’s surface.
The sensor has an internal heating element that needs to reach a specific temperature for proper function. When hydrogen gas interacts with the heated surface of the sensor, it causes a chemical reaction that changes the sensor’s resistance.
The resistance change is then converted into an electrical signal that is sent as an analog voltage (proportional to the gas concentration). The digital output can be used to trigger an alert or take action when the concentration exceeds a set threshold.

Technical Specifications:

Operating Voltage: 5V DC (typically).
Sensor Resistance: The resistance of the sensor element changes with gas concentration, usually between a few kΩ and several hundred kΩ.
Sensitivity Range: Can detect hydrogen gas concentrations from 100 to 10,000 ppm.
Response Time: The sensor typically responds within a few seconds to changes in gas concentration, but it requires 1-2 minutes of preheating for optimal performance.
Heater Resistance: Typically around 33Ω (varies slightly depending on the manufacturer).

Module Features:

Analog Output: Provides a continuous voltage that increases with hydrogen concentration, suitable for continuous monitoring and measurement.
Digital Output: A high/low signal used to trigger alarms or activate other safety mechanisms when gas concentrations exceed a certain threshold.
Heater Element: The internal heater requires warm-up time to stabilize for accurate detection of hydrogen gas.

Applications:

Hydrogen Gas Leak Detection: Ideal for detecting hydrogen leaks in hydrogen storage facilities, fuel cells, battery systems, and industrial applications where hydrogen is used as a fuel or reactant.
Safety Systems: Integrated into safety systems to monitor and alert when hydrogen concentrations reach unsafe levels, preventing potential explosions or fires.
Fuel Cell Monitoring: In hydrogen fuel cell systems, the MQ8 sensor is used to ensure safe operation by detecting hydrogen leaks in the system.
Air Quality Monitoring: Can be used to monitor air quality in environments where hydrogen is used or produced, such as laboratories, factories, or energy plants.
DIY and Prototyping Projects: The MQ8 sensor is widely used in Arduino-based projects or other microcontroller-based applications for hobbyists and developers working on gas detection systems.

Package Includes:

1 Piece-MQ8-Hydrogen Gas Sensor Module

Shipping

We strive to ensure that your orders reach every corner of India efficiently and reliably. To achieve this, we partner with some of the most trusted courier services in the country, including E-Kart, Amazon Surface, Delhivery, DTDC, Blue Dart, XpressBees, Ecom Express, and India Speed Post—especially for rural areas, based on the most suitable courier partner for each customer’s location.

For interior or remote regions not serviced by private couriers, we rely on India Post to ensure complete coverage.

We make every effort to dispatch orders on the same day they are placed or within 24 hours of receiving the order. Orders placed before 1 PM (IST) are typically shipped the same day, while those placed after 1 PM are scheduled for shipment the next working day.

This level of commitment applies throughout the week, including weekdays, and often extends to weekends and public holidays to serve our customers better.

We also offer local self-pickup options for customers in nearby areas—available on weekdays and partially available on weekends.

Warranty

This item is covered by a 7-day limited warranty from the date of delivery, applicable only to manufacturing defects. This warranty is provided solely to protect customers against any such defects. In the unlikely event of an issue, replacement or reimbursement will be offered after a complete inspection and confirmation of the defect.

What voids the warranty?

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Note: For your peace of mind, all electronic items are imported and, as such, do not come with a manufacturer’s warranty or guarantee. However, we take great care to ensure product quality—each item is thoroughly inspected before dispatch.

Other Info

Country of origin: China
Packer/ Importer: Ercoms Robotics Lab

Reviews

There are no reviews yet.

Be the first to review “MQ8-Hydrogen Gas Sensor Module”

SKU: 62-ERMQS007 Category: Gas Sensors Tags: AirQualityMonitoring, ArduinoCompatible, EnvironmentalMonitoring, FuelCellMonitoring, GasLeakDetection, GasSafety, HydrogenGasSensor, HydrogenSafety, Module, MQ8

Cart

Cart

Top rated products

Testimonial

Google Review

Bamboo Lab A1 3D Printing

Latest News

MQ8-Hydrogen Gas Sensor Module

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Key Features:

How It Works:

Technical Specifications:

Module Features:

Applications:

Package Includes:

Shipping

Warranty

Other Info

Reviews

Related products

L9110S Dual Channel H-Bridge Motor Driver Module

Quick Review:

Need in Quantity? Let’s Talk!

DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink

Quick Review:

Need in Quantity? Let’s Talk!

Sound Detection Sensor Module

Quick Review:

Need in Quantity? Let’s Talk!

16 Channel Isolated 5V 10A Relay Module Optocoupler

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

Quick Review:

Need in Quantity? Let’s Talk!

Mini Motor Drive Shield Expansion Board L293D Module

Quick Review:

Need in Quantity? Let’s Talk!

Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)

Quick Review:

Need in Quantity? Let’s Talk!

Motor Driver L293D Module With 7505

Quick Review:

Need in Quantity? Let’s Talk!

Information

Sevices

Our Policy

My account

Cart