Top rated products
-
Drill Machine- MB140 For PCB Drilling & Mini Craft
Original price was: ₹425.00.₹169.00Current price is: ₹169.00.
-
Jumper Wire DuPont Female To Female (10 Pins)
Original price was: ₹25.00.₹22.00Current price is: ₹22.00.
-
Plastic Blue Thin Spur Gear-50Teeth for 6mm Shaft
Original price was: ₹65.00.₹55.00Current price is: ₹55.00.
-
BD140 PNP Bipolar Transistor
Original price was: ₹25.00.₹22.00Current price is: ₹22.00.
-
BO Motor Wheel- 75mm Dia. x 8mm Width (1Pcs)
Original price was: ₹22.00.₹16.00Current price is: ₹16.00.
Google Review
Bamboo Lab A1 3D Printing
A3967 Stepper Motor Driver For Arduino
Original price was: ₹289.00.₹249.00Current price is: ₹249.00.
SKU : 13-ERDRV020STOCK: 2 (WooHoo!) Available
Quick Review:
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 micro-stepping driver.
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Quantity? Let’s Talk!
Availability:
2 in stock
2 in stock
15 in stock
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.
- 100% Brand New and High Build Quality
- Compatible with 4, 6, and 8 wire stepper motors of any voltage
- Adjustable current control from 150mA/phase to 750mA/phase
- MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
- Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds
Technical Specifications:
- Easy to interface with Arduino
- Adjustable current control.
- A3967 microstepping driver.
- Compatible with 4, 6, and 8 wire stepper motors of any voltage.
- Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds.
Applications:-
- DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage.
- Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.
- Boost charger. You can use the 12V power supply to charge a battery of more than 12V, for example, 24V battery.
Package Includes:
- 1 Piece- A3967 Stepper Motor Driver
| Weight | 10 g |
|---|
Shipping
We strive to ensure that your orders reach every corner of India efficiently and reliably. To achieve this, we partner with some of the most trusted courier services in the country, including E-Kart, Amazon Surface, Delhivery, DTDC, Blue Dart, XpressBees, Ecom Express, and India Speed Post—especially for rural areas, based on the most suitable courier partner for each customer’s location.
For interior or remote regions not serviced by private couriers, we rely on India Post to ensure complete coverage.
We make every effort to dispatch orders on the same day they are placed or within 24 hours of receiving the order. Orders placed before 1 PM (IST) are typically shipped the same day, while those placed after 1 PM are scheduled for shipment the next working day.
This level of commitment applies throughout the week, including weekdays, and often extends to weekends and public holidays to serve our customers better.
We also offer local self-pickup options for customers in nearby areas—available on weekdays and partially available on weekends.
Warranty
This item is covered by a 7-day limited warranty from the date of delivery, applicable only to manufacturing defects. This warranty is provided solely to protect customers against any such defects. In the unlikely event of an issue, replacement or reimbursement will be offered after a complete inspection and confirmation of the defect.
What voids the warranty?
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
Note: For your peace of mind, all electronic items are imported and, as such, do not come with a manufacturer’s warranty or guarantee. However, we take great care to ensure product quality—each item is thoroughly inspected before dispatch.
Other Info
- Country of origin: China
- Packer/ Importer: Ercoms Robotics Lab
Related products
-
L9110S Dual Channel H-Bridge Motor Driver Module
Original price was: ₹149.00.₹89.00Current price is: ₹89.00.Add to cart Buy nowQuick Review:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Quantity? Let’s Talk!
Availability:
-
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
Original price was: ₹575.00.₹199.00Current price is: ₹199.00.Read moreQuick Review:
- Supply Voltage: 12V
- Standard interfaces (such as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A was added to protect the parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Quantity? Let’s Talk!
Availability:
-
2 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹220.00.₹135.00Current price is: ₹135.00.Add to cart Buy nowQuick Review:
- Control voltage: 5V
- Channels: 2
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Bulk Quantity? Let’s Talk!
Availability:
-
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹128.00.₹94.00Current price is: ₹94.00.Add to cart Buy nowQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Quantity? Let’s Talk!
Availability:
-
MB102 3.3V/5V Breadboard Power Supply Module
Original price was: ₹95.00.₹89.00Current price is: ₹89.00.Add to cart Buy nowQuick Review:
- Power Supply: 3.3V and 5V for breadboard,
- Fits securely: standard 400 and 830 points breadboard
- Short circuit protection: Yes
- On-board On/OFF switch to control power supply
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Bulk Quantity? Let’s Talk!
Availability:
-
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Original price was: ₹1,850.00.₹1,648.00Current price is: ₹1,648.00.Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Current sense output proportional to motor current
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Quantity? Let’s Talk!
Availability:
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹230.00.₹149.00Current price is: ₹149.00.Add to cart Buy nowQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Quantity? Let’s Talk!
Availability:
-
NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module
Original price was: ₹225.00.₹74.00Current price is: ₹74.00.Add to cart Buy nowQuick Review:
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
- Chip: Module based on the NE555 chip.
- Operation: Monostable
Shipping: Usually delivered in 3-7 days.
Brand New || Best Quality || Skype and Video Support Available.
Need in Bulk Quantity? Let’s Talk!
Availability:
&url=https://ercomsroboticslab.com/product/dual-monster-moto-shield-vnh2sp30-dc-motor-driver-2x14a-peak-30a/&media=https://ercomsroboticslab.com/wp-content/uploads/2025/04/ERDRV013-Dual-Monster-Moto-Shield-VNH2SP30-DC-Motor-Driver-2x14A-Peak-30A-copy.webp){kind=link}
Reviews
There are no reviews yet.