Drill Machine- MB140 For PCB Drilling & Mini Craft Original price was: ₹425.00.Current price is: ₹169.00.
Jumper Wire DuPont Female To Female (10 Pins) Original price was: ₹25.00.Current price is: ₹22.00.
Plastic Blue Thin Spur Gear-50Teeth for 6mm Shaft Original price was: ₹65.00.Current price is: ₹55.00.
BD140 PNP Bipolar Transistor Original price was: ₹25.00.Current price is: ₹22.00.
BO Motor Wheel- 75mm Dia. x 8mm Width (1Pcs) Original price was: ₹22.00.Current price is: ₹16.00.

itz Ashish

11:43 04 Apr 25

Here no one buys any type of equipment, it is very costly and makes you lose money.

Ravish Raizada

09:28 13 Feb 25

Ritu Yadav

13:55 27 Dec 24

Very expensive

Rashish Baranwal

08:05 26 Aug 24

Every project item available here

Abhinav Srivastava

13:57 16 Aug 24

Detailed and knowledgeable

Abhinav Mishra

14:23 10 Aug 24

Well made

Akash s Rawat

14:23 10 Aug 24

Well maintained

Chandan Patel

11:56 05 Aug 24

Best institute for robotics training and projects.

Kamran Ali

07:33 05 Aug 24

A very good experience is there. Concerned person ramchandra ji is very coperative and has good knowledge of project development.

AMBER

03:20 28 May 24

💯👌👌👌
Robotics Products: 💯
Quality: 💯
Price: 💯
Service: 💯👌

“5V Step-Up Power Module Lithium Battery Charging Protection Board USB (134N3P)” has been added to your cart. View cart

-63%

Rolling Ball Tilt Sensor Vibration switch module

Original price was: ₹188.00.Current price is: ₹69.00.

Quick Review:

Operating voltage: 3.3 to 5VDC
Comparator: LM393
Ball Rolling type of tilt sensor
This small module is easy to use
A fixed bolt hole for easy installation

Shipping: Usually delivered in 3-7 days.

Brand New || Best Quality || Skype and Video Support Available.

Need in Quantity? Let’s Talk!

Availability:

8 in stock

Select Below Products to Add Together:

Rolling Ball Tilt Sensor Vibration switch module

This item: Rolling Ball Tilt Sensor Vibration switch module

8 in stock

L293D Multi Motor Driver Shield For Arduino-SLAEX039

7 in stock

RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield

~~RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield~~

Out of stock

5V Step-Up Power Module Lithium Battery Charging Protection Board USB (134N3P)

5 in stock

The Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino come with the basic components for operation. Supplying power and it is good to be used. Attach it to object and it will detect whether the object is tilt. Simple usage as it is the digital output, so you will know the object is tilt or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The Tilt Sensor is the ball rolling type, NOT Mercury type. Comes with an M3 mounting hole for ease of attaching it to an object. On board, it provides a tilt switch, high sensitivity and commonly being used for tilt detection. The module comes with power LED and status LED for the visual indicator. The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted over the threshold angle. We have tested, the tilt angle is quite big, from 45 degrees to 130 degrees. However, it depends on the angular velocity too. It can be used as a vibration sensor too.

Pin Description:

VCC: Connect the power supply positive
GND: Connect the power supply negative
DO: Digital signal output
AO: Use this vibration sensor to disable this function

Instructions:

The product does not shake, the vibration switch was disconnected, the output high, Greenlight does not light
The product vibration, the vibration switch instantaneous conduction, the output low, green light
The output can be directly connected with the microcontroller, through the microcontroller to detect high and low levels, which to detect whether the environment vibration, play a warning role

Use:

For a variety of vibration trigger, reported Pao alarm, intelligent car, electronic building blocks and so on.
Please note that this module in the induction of a small shock when the trigger time will be very short, not enough to drive the relay, some people can directly connect with the relay module data, the actual use of poor results.

Technical Specifications:

Operating voltage: 3.3 to 5VDC
Comparator: LM393
Ball Rolling type of tilt sensor
This small module is easy to use
A fixed bolt hole for easy installation
Wide voltage LM393 comparator

Package Includes:

1 Piece– Rolling Ball Tilt Sensor Vibration switch module

Shipping

We strive to ensure that your orders reach every corner of India efficiently and reliably. To achieve this, we partner with some of the most trusted courier services in the country, including E-Kart, Amazon Surface, Delhivery, DTDC, Blue Dart, XpressBees, Ecom Express, and India Speed Post—especially for rural areas, based on the most suitable courier partner for each customer’s location.

For interior or remote regions not serviced by private couriers, we rely on India Post to ensure complete coverage.

We make every effort to dispatch orders on the same day they are placed or within 24 hours of receiving the order. Orders placed before 1 PM (IST) are typically shipped the same day, while those placed after 1 PM are scheduled for shipment the next working day.

This level of commitment applies throughout the week, including weekdays, and often extends to weekends and public holidays to serve our customers better.

We also offer local self-pickup options for customers in nearby areas—available on weekdays and partially available on weekends.

Warranty

This item is covered by a 7-day limited warranty from the date of delivery, applicable only to manufacturing defects. This warranty is provided solely to protect customers against any such defects. In the unlikely event of an issue, replacement or reimbursement will be offered after a complete inspection and confirmation of the defect.

What voids the warranty?

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Note: For your peace of mind, all electronic items are imported and, as such, do not come with a manufacturer’s warranty or guarantee. However, we take great care to ensure product quality—each item is thoroughly inspected before dispatch.

Other Info

Country of origin: China
Packer/ Importer: Ercoms Robotics Lab

Reviews

There are no reviews yet.

Be the first to review “Rolling Ball Tilt Sensor Vibration switch module”

SKU: 64-ERVRS002-1 Category: Other Sensors Tags: Module, Sensor, SW-420 Vibration, Vibration Sensor Brand: Generic

Cart

Cart

Top rated products

Testimonial

Google Review

Bamboo Lab A1 3D Printing

Latest News