Drill Machine- MB140 For PCB Drilling & Mini Craft Original price was: ₹425.00.Current price is: ₹169.00.
Jumper Wire DuPont Female To Female (10 Pins) Original price was: ₹25.00.Current price is: ₹22.00.
Plastic Blue Thin Spur Gear-50Teeth for 6mm Shaft Original price was: ₹65.00.Current price is: ₹55.00.
BD140 PNP Bipolar Transistor Original price was: ₹25.00.Current price is: ₹22.00.
BO Motor Wheel- 75mm Dia. x 8mm Width (1Pcs) Original price was: ₹22.00.Current price is: ₹14.00.

itz Ashish

11:43 04 Apr 25

Here no one buys any type of equipment, it is very costly and makes you lose money.

Ravish Raizada

09:28 13 Feb 25

Ritu Yadav

13:55 27 Dec 24

Very expensive

Rashish Baranwal

08:05 26 Aug 24

Every project item available here

Abhinav Srivastava

13:57 16 Aug 24

Detailed and knowledgeable

Abhinav Mishra

14:23 10 Aug 24

Well made

Akash s Rawat

14:23 10 Aug 24

Well maintained

Chandan Patel

11:56 05 Aug 24

Best institute for robotics training and projects.

Kamran Ali

07:33 05 Aug 24

A very good experience is there. Concerned person ramchandra ji is very coperative and has good knowledge of project development.

AMBER

03:20 28 May 24

💯👌👌👌
Robotics Products: 💯
Quality: 💯
Price: 💯
Service: 💯👌

“W1209 Digital Temperature Controller Thermostat Module” has been added to your cart. View cart

-34%

6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle

Original price was: ₹149.00.Current price is: ₹99.00.

Quick Review:

Operating voltage: 6-30V
Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
Optocoupler Isolation.

Shipping: Usually delivered in 3-7 days.

Brand New || Best Quality || Skype and Video Support Available.

Need in Bulk Quantity? Let’s Talk!

Availability:

Out of stock

It is 6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle Switches with Digital LED display .It is mostly used in Home Automation Delay Timer Control Switch Module Timer Controller. The Relay Module operates at an Operating voltage range of 6-30V, also it supports micro USB 5.0V power supply. Output capability: Can control the device within DC 30V 5A or AC 220V 5A. It can be applied to many fields as there is a wide range of applications.

Operation Mode:

P1: Trigger signal, the relay is on “OP” time, and then disconnect; Within the “OP” time, proceed as follows:
P1.1: the signal is triggered again, invalid
P1.2: the signal is triggered again, re-clocking
P1.3: Signal has triggered again, the relay is disconnected, stop the clock;
P-2: Trigger signal, after the “CL” time is off, the “OP” time is on. When the timing is completed, the replay will be disconnected;
P3.1: Trigger signal, after the “OP” time is on, the “CL” time is off, then cycle the above actions. If trigger signal within the loop, the relay will be disconnected and stop the clock. The number of cycles ( “LOP “) can be set.
P3.2: No need to trigger the signal after powering up, the “OP” time is on, the “CL” time is off, then cycle the above actions; The number of cycles ( “LOP “) can be set.
P-4: Signal holding function. If the signal is triggered, timing is cleared, the relay remains on; when the signal disappears, the relay will be off when the “OP” time is over; if another signal is triggered during timing, timing will be cleared.

How to choose the time interval:

parameter Introduction: OP power over time, turn off time CL, LOP cycle times (1-999 times, “—” is unlimited cycle)

1. In the selection of parameter set interface mode, and press the STOP button to select the time.

(1)xxx. if the decimal point is in some place, the time interval is s-1 999 s

(2)xx. x is the decimal place is ten, the time interval is 0.1 s 99.9 s-

(3)x. x. x is the decimal point are all on, the time interval is 1 min-999 min

How to set the parameter:

First, make sure relay operation mode
According to the operating relay mode, the main interface (power module will flash current operating mode; standard mode P1.1, then come into the main interface); long press SET key two seconds and then choose and enter selection interface mode; by pressing UP, DOWN key to choose the mode setting (P1.1 ~ P4)
After selecting the mode, press short SET to set the corresponding parameter, then the parameter you want to set will flash (OP power in time; CL power off time; LOP cycle times, “—” is unlimited cycle ); by UP, DOWN to set the parameter value, support long press (increase or decrease quickly) and press slightly (increase or decrease of 1 unit); after setting the parameter value by short press the STOP key to choosing decimal place; choose the time interval (corresponding time interval is 0.1 s-999 min); Short press SET to set the current mode next parameter, the process is the same as above
After the setting mode parameter, press and hold the SET button then hold the current configuration mode will flash, then go back to the main interface; define success parameter main interface: when the relay does not work, it will show “000” (no decimal point); the operating state relay, the screen has a decimal point

Mode Select Interface:

press and hold the SET key to enter; after setting, long-press the SET button back on the main interface

Activate Relay Mode:

ON: PO in power over time, the relay can be connected
OFF: relay is not allowed to connect, when in the off state

in short main interface press the STOP key to achieve turn ON and OFF, the current state will flash; then back to the main interface

(this function is a function of a sudden stop, 1 key to turn off the relay)

Sleep Mode:

C-P Sleep mode: within 5 minutes, no operation; nixie tube will close auto display, and a function program well

Note:

1. Press and holding the STOP button for 2 seconds can achieve change from C-P to O-d; the Current state will flash and then return to the main interface

2. The relay contact is passive and electricity production; 1 channel has the control function on / off

Technical Specifications:

Model Type:Relay Module
No. of Channels:1
Operating Voltage (VDC):6 to 30
Supply Current (A):0.05
Trigger Voltage (VDC):5
Switching Voltage (VAC):250@10A
Switching Voltage (VDC):30@10A
Operating Temperature (°C):-40 to 85
Storage Temperature (°C):-40 to 80
Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will be in memory forever.
Wide voltage power supply (6 ~ 30V), supports micro USB 5.0V power supply, easy to use.
The interface is clear, simple, powerful, and easy to understand, and can meet almost all your needs.
With an emergency stop function (“STOP” button) and reverse polarity protection which can avoid burning by reverse connection.
Adding sleeping mode, when the mode is enabled, if there is no operation within 5 minutes, the display will be turned off automatically, and pressing any button will wake it up;
You can set different parameters of OP, CL, and LOP, which are independent of each other and are stored separately;
All the parameter settings will be stored automatically when power is off.

Package Includes:

1 Piece-6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle

Weight	30 g

Shipping

We strive to ensure that your orders reach every corner of India efficiently and reliably. To achieve this, we partner with some of the most trusted courier services in the country, including E-Kart, Amazon Surface, Delhivery, DTDC, Blue Dart, XpressBees, Ecom Express, and India Speed Post—especially for rural areas, based on the most suitable courier partner for each customer’s location.

For interior or remote regions not serviced by private couriers, we rely on India Post to ensure complete coverage.

We make every effort to dispatch orders on the same day they are placed or within 24 hours of receiving the order. Orders placed before 1 PM (IST) are typically shipped the same day, while those placed after 1 PM are scheduled for shipment the next working day.

This level of commitment applies throughout the week, including weekdays, and often extends to weekends and public holidays to serve our customers better.

We also offer local self-pickup options for customers in nearby areas—available on weekdays and partially available on weekends.

Warranty

This item is covered by a 7-day limited warranty from the date of delivery, applicable only to manufacturing defects. This warranty is provided solely to protect customers against any such defects. In the unlikely event of an issue, replacement or reimbursement will be offered after a complete inspection and confirmation of the defect.

What voids the warranty?

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Note: For your peace of mind, all electronic items are imported and, as such, do not come with a manufacturer’s warranty or guarantee. However, we take great care to ensure product quality—each item is thoroughly inspected before dispatch.

Other Info

Country of origin: China
Packer/ Importer: Ercoms Robotics Lab

Reviews

There are no reviews yet.

Be the first to review “6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle”

Cart

Cart

Top rated products

Testimonial

Google Review

Latest News