Drill Machine- MB140 For PCB Drilling & Mini Craft Original price was: ₹425.00.Current price is: ₹169.00.
Jumper Wire DuPont Female To Female (10 Pins) Original price was: ₹25.00.Current price is: ₹22.00.
Plastic Blue Thin Spur Gear-50Teeth for 6mm Shaft Original price was: ₹65.00.Current price is: ₹55.00.
BD140 PNP Bipolar Transistor Original price was: ₹25.00.Current price is: ₹22.00.
BO Motor Wheel- 75mm Dia. x 8mm Width (1Pcs) Original price was: ₹22.00.Current price is: ₹16.00.

itz Ashish

11:43 04 Apr 25

Here no one buys any type of equipment, it is very costly and makes you lose money.

Ravish Raizada

09:28 13 Feb 25

Ritu Yadav

13:55 27 Dec 24

Very expensive

Rashish Baranwal

08:05 26 Aug 24

Every project item available here

Abhinav Srivastava

13:57 16 Aug 24

Detailed and knowledgeable

Abhinav Mishra

14:23 10 Aug 24

Well made

Akash s Rawat

14:23 10 Aug 24

Well maintained

Chandan Patel

11:56 05 Aug 24

Best institute for robotics training and projects.

Kamran Ali

07:33 05 Aug 24

A very good experience is there. Concerned person ramchandra ji is very coperative and has good knowledge of project development.

AMBER

03:20 28 May 24

💯👌👌👌
Robotics Products: 💯
Quality: 💯
Price: 💯
Service: 💯👌

-21%

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

Name: Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module
Brand: Generic
SKU: 58-FLYCON006
Availability: InStock

Original price was: ₹14,449.00.Current price is: ₹11,449.00.

SKU : 58-FLYCON006

STOCK: 1 (WooHoo!) Available

Quick Review:

Micro SD recording flight data.
Multicolor LED lights.
14 PWM/servo output.
Bus interface (UART, I2C, SPI, CAN).
Provide automatic and manual modes.
Provide redundant power input and failover.
The integrated backup power and backup controller fail-safe.
Provide a multi-tone buzzer Interface.
The advanced 32-bit ARM Cortex-M4 high-performance processor can run NuttX RTOS real-time operating system.

Shipping: Usually delivered in 3-7 days.

Brand New || Best Quality || Skype and Video Support Available.

Need in Bulk Quantity? Let’s Talk!

Availability:

1 in stock

Select Below Products to Add Together:

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

This item: Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

1 in stock

FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone

~~FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone~~

Out of stock

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.

PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats, and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need, and combines the functionality of the PX4FMU PX4IO.

A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

Technical Specifications:

Pixhawk V2.4.8 Flight board:

The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
14 PWM / servo output.
Bus interface (UART, I2C, SPI, CAN).
The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
Provide automatic and manual modes.
Provide redundant power input and failover.
Multicolor LED lights.
Provide a multi-tone buzzer Interface.
Micro SD recording flight data.

Processor:

32bit STM32F427 Cortex M4 core with FPU.
168 MHz.
128 KB RAM.
2 MB Flash.
32-bit STM32F103 failsafe co-processor.

Sensors:

ST Micro L3GD20H 16 bit gyroscope.
ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.
Invensense MPU 6000 3-axis accelerometer/gyroscope.
MEAS MS5607 barometer.

Interfaces:

5x UART (serial ports), one high-power capable, 2x with HW flow control.
2x CAN (one with an internal 3.3V transceiver, one on expansion connector).
Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.
Futaba S.BUS® compatible input and output.
PPM sum signal input.
RSSI (PWM or voltage) input.
I2C.
SPI.
3.3 and 6.6V ADC inputs.
Internal micro USB port and external micro USB port extension.

PIXHAWK PPM Encoder Module:

Support the input channels: 8.
Output: PPM SUM × 1 / MUX × 1.

Glass Fiber Flight Controller Anti-vibration/Shock absorber Set:

Color: Black
Material: Glass-fiber
Suit for the different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4

NEO-M8N GPS Module:

Receiver type 72-channel Ublox M8 engine.
GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
SBAS L1 C/A: WAAS, EGNOS, MSAS.
Galileo-ready E1B/C (NEO-M8N).
Nav. update rate1 Single GNSS: up to 18 HZ.
Concurrent GNSS: up to 10 Hz.
Position accuracy2 2.0 m CEP.
Acquisition2 Cold start: 26 s.
Aided starts: 2 s.
Reacquisition: 1.5 s.
Sensitivity2 Tracking & Nav: –167 dBm.
Cold start: –148 dBm.
Hot starts: –156 dBm.
Assistance AssistNow GNSS Online.
Assist Now GNSS Offline (up to 35 days)3.
Assist Now Autonomous (up to 6 days).
OMA SUPL & 3GPP compliant
Oscillator TCXO (NEO-M8N/Q).
Crystal (NEO-M8M).
RTC crystal Built-In.
Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
lowest noise figure (NEO-M8N/Q).
Anti-jamming Active CW detection and removal.
An extra onboard SAW bandpass filter (NEO-M8N/Q).
Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
Supported antennas Active and passive.
Odometer Travelled distance.
Data-logger For position, velocity, and time (NEO-M8N).

GPS Folding Base Antenna set:

Material: CNC Aluminum alloy, carbon glass fiber rod
Mounting rod diameter: 4mm
length of rod: 14 cm.
GPS plate diameter: 40 mm.
Base plate diameter: 35 mm
Mounting hole spacing: 16-35mm
Weight: 20g
Colour: Anodised black
Note: Adhesive Pad is not included.

APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0:

Max input voltage: 28V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
Support 6S battery.

Package Includes:

1 Piece–Pixhawk 2.4.8 32 Bit Autopilot PX4 Drone Flight Controller.
1 Piece–Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
1 Piece–Buzzer Module.
1 Piece–Micro USB-A to Micro-B Cable -100cm
1 Piece–GPS Folding Base Antenna set.
1 Piece–PPM Encoder V1.0 with wire
1 Piece–Power Module v1.0
1 Piece–M8N GPS With Campass

Weight	18 g
Dimensions	36 × 36 × 5 mm

Shipping

We strive to ensure that your orders reach every corner of India efficiently and reliably. To achieve this, we partner with some of the most trusted courier services in the country, including E-Kart, Amazon Surface, Delhivery, DTDC, Blue Dart, XpressBees, Ecom Express, and India Speed Post—especially for rural areas, based on the most suitable courier partner for each customer’s location.

For interior or remote regions not serviced by private couriers, we rely on India Post to ensure complete coverage.

We make every effort to dispatch orders on the same day they are placed or within 24 hours of receiving the order. Orders placed before 1 PM (IST) are typically shipped the same day, while those placed after 1 PM are scheduled for shipment the next working day.

This level of commitment applies throughout the week, including weekdays, and often extends to weekends and public holidays to serve our customers better.

We also offer local self-pickup options for customers in nearby areas—available on weekdays and partially available on weekends.

Warranty

This item is covered by a 7-day limited warranty from the date of delivery, applicable only to manufacturing defects. This warranty is provided solely to protect customers against any such defects. In the unlikely event of an issue, replacement or reimbursement will be offered after a complete inspection and confirmation of the defect.

What voids the warranty?

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Note: For your peace of mind, all electronic items are imported and, as such, do not come with a manufacturer’s warranty or guarantee. However, we take great care to ensure product quality—each item is thoroughly inspected before dispatch.

Other Info

Country of origin: China
Packer/ Importer: Ercoms Robotics Lab

Reviews

There are no reviews yet.

Be the first to review “Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module”

SKU: 58-FLYCON006 Category: Flight Controllers, Radios Brand: Generic

Top rated products

Google Review

Bamboo Lab A1 3D Printing

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

Technical Specifications:

Package Includes:

Shipping

Warranty

Other Info

Reviews

Quick Review:

Need in Quantity? Let’s Talk!

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Quick Review:

Need in Quantity? Let’s Talk!

Quick Review:

Need in Quantity? Let’s Talk!

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Quick Review:

Need in Quantity? Let’s Talk!

Information

Sevices

Our Policy

My account

Cart

Top rated products

Google Review

Bamboo Lab A1 3D Printing

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

Quick Review:

Need in Bulk Quantity? Let’s Talk!

Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with Buzzer, GPS Stand, Shock Absorber and Encoder Power Module

Technical Specifications:

Package Includes:

Shipping

Warranty

Other Info

Reviews

Related products

Fly Sky FS-CT6B 6-Channel 2.4 Ghz Transmitter and Receiver

Quick Review:

Need in Quantity? Let’s Talk!

SP Racing F3 ACRO Flight Controller

Quick Review:

Need in Bulk Quantity? Let’s Talk!

CC3D EVO Openpilot Open Source 32 Bits Flight Controller with Protective Case

Quick Review:

Need in Bulk Quantity? Let’s Talk!

KK2.1.5 Multi-Rotor LCD Flight Control Board

Quick Review:

Need in Bulk Quantity? Let’s Talk!

FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone

Quick Review:

Need in Quantity? Let’s Talk!

Flysky FS-GT2 Transmitter with FS-GR3E Receiver for Rc Car/Boat

Quick Review:

Need in Quantity? Let’s Talk!

Thunder QQ SUPER Multi Rotor Flight Control Board

Quick Review:

Need in Bulk Quantity? Let’s Talk!

FLY SKY FS IA6B RF 2.4GHz 6CH PPM Output with iBus Port Receiver

Quick Review:

Need in Quantity? Let’s Talk!

Information

Sevices

Our Policy

My account

Cart